IWS-FR+ Studs
IWS-FR+ Joists
FAST MgO Board
IWS-FAST® Board is dimensionally stable when exposed to moisture contents and relative humidity (RH) changes.
IWS-FAST® Board has been tested to BS EN ISO 1182 by Exova Warrington Fire.
Category C Compliant solution to the new UKTFA guidelines “Design Guide to Separating Distances for Timber Frame Buildings during Construction”.
FAST Chipboard
The tongue and groove FAST® Chipboard is available in 18mm for separating floor sub-decks or 22mm thickness for finished floor construction.
The base product, EGGER Peel Clean Xtra, is manufactured to the specification of EN312, is regularly audited independently, is FSC chain-of-custody certified and has been independently certified by the BBA (No.08/4585) as a chipboard flooring board capable of providing temporary weather protection prior to completion of the building envelope.
The chipboard has a reactive Hot Melt Polyurethane coating rolled on which when cured forms a FR barrier and creates FAST® Chipboard providing robustness against fire.
FAST® Chipboard has a weather resistant peel clean top surface layer, which results in a product that offers protection from moisture penetration.
IWS-FR+OSB3 Sheathing
EGGER Eurostrand OSB3 has been specifically designed to provide not only dimensional stability and high load bearing properties but also the ability to perform in humid conditions. All Eurostrand OSB3 is supplied pre conditioned with a minimum moisture content of 5% which helps to reduce possible dimensional movement offering better overall dimensional stability.
Eurostrand OSB3 is CE-certified according to EN 13986 and has been independently certified by the BBA (No.08/4546) as a load bearing oriented strand board for use in humid conditions. EGGER OSB3 complies with PEFC chain of custody scheme.
IWS-FR+Plywood Sub Deck
EGGER Eurostrand OSB3 has been specifically designed to provide not only dimensional stability and high load bearingproperties but also the ability to perform in humid conditions. All Eurostrand OSB3 is supplied pre conditioned with a minimum moisture content of 5% which helps to reduce possible dimensional movement offering better overall dimensional
stability.
Eurostrand OSB3 is CE-certified according to EN 13986 and has been independently certified by the BBA (No.08/4546) as a load bearing oriented strand board for use in humid conditions.
EGGER OSB3 complies with PEFC chain of custody scheme.
Fire Retardant Timber Cladding
Compliant Category B & C Solutions
The UK Timber Frame Association (UKTFA) has launched new guidance designed to help clients, designers and CDM Coordinators consider the risk of fire to neighbouring buildings should a fire occur in a timber frame building under construction and improve the building fabric’s defence against both accidental fire and arson attack.
The guidance focuses principally on separating distances between a receiver (existing building) and emitter (new timber frame building) and has established how wide these distances need to be to mitigate the fire risk through newly defined Categories A,B and C. The guidelines also consider susceptibility to ignition of fire, a much overlooked subject.
Category A – Standard open panel timber frame
Category B – Reduced fire spread frames
Category C – Fire spread resistant frames